HM40

HM40
Product Description

Portable thermo-hygrometer designed for accurate and quick measurements of humidity and temperature.  It uses the HUMICAP® sensor for reliable performance, measuring relative humidity from 0–100% RH and temperature across different ranges depending on the model, such as -10 to +60 °C (HM41) or up to +100 °C (HM46, with short-term tolerance to +180 °C). 
It calculates additional parameters like dew point, wet-bulb temperature, absolute humidity, mixing ratio, and enthalpy. 
The device features a graphical display with multilingual support, powered by two AA batteries for approximately 100 hours of operation. 
Calibration can be performed via replaceable probes or field calibrators like the HMK15, ensuring consistent accuracy. 
The HM40 is compact and robust, ideal for applications in HVAC, industrial processes, and life sciences.

Read more Show less

QS Group

  • Country/Region:
    Italy
  • On CPHI since:
    2026
  • Certificates:
    4
  • Employees:
    50 - 99
Company types
Other
View company profile
Categories
more categories Show less

QS Group

  • Country/Region:
    Italy
  • On CPHI since:
    2026
  • Certificates:
    4
  • Employees:
    50 - 99
Company types
Other
View company profile

More Products from QS Group (47)

  • Filter Transferpette® S / Transferpette® electronic, PE

    Product Filter Transferpette® S / Transferpette® electronic, PE

    Polyethylene (PE) filters for Transferpette® S and Transferpette® electronic pipettes, designed to protect both pipettes and samples from cross contamination and aerosols. Available in packs of 25, they are compatible with specific pipette models:
    - Article Code 704652: Suitable for Transferpette...
  • FMS

    Product FMS

    Software designed by TSI to monitor environmental conditions in cleanrooms and regulated environments in real time. It provides a centralized platform to collect and analyze data from particle sensors, microbiological samplers, temperature, humidity, and pressure. The system ensures compliance with...
  • GIT Tester Gloves

    Product GIT Tester Gloves

    Allows the verification of the integrity of gloves with the pressure decay method according to ISO 14644-7. Minimum detectable bore: 50 microns. With an autonomy of over an hour, it can be used in Clean Rooms without electrical and pneumatic connections, with internal battery charger and compressor....
  • GSB Series Gloves

    Product GSB Series Gloves

    Pharma-grade, audit-ready, custom-made gloves for isolators, gloveboxes and RABS, manufactured in Germany with short lead times. 

    GSB:• FDA-compliant antistatic compound with excellent gas barrier properties 
    • High chemical resistance to aggre...
  • GSC Series Gloves

    Product GSC Series Gloves

    Pharma-grade, audit-ready, custom-made gloves for isolators, gloveboxes and RABS, manufactured in Germany with short lead times. 

    GSC:
    • CSM compound with excellent resistance to aging (oxygen, ozone, UV) and to acids and alkali 
    • Broad sterilization compatibility: VHP...
  • GSE Series Gloves

    Product GSE Series Gloves

    Pharma-grade, audit-ready, custom-made gloves for isolators, gloveboxes and RABS, manufactured in Germany with short lead times. 
    GSE:
    • Electrically dissipative, FDA compliant EPDM compound (EN 16350) 
    • High resistance to disinfectants, alcohols, acids and alkal...
  • HPD2

    Product HPD2

    High-pressure diffuser designed for microbiological sampling and particulate monitoring in compressed air and gas systems, meeting quality standards for regulated environments. Constructed from 316L stainless steel, it is compatible with samplers such as the P100 and V100/RCG, operating at flow rates betwe...
  • ImpactAir-90

    Product ImpactAir-90

    Portable microbial sampler with a built-in high-flow pump, designed for rapid sampling using 9 cm agar plates. It uses slit-to-agar technology with rotating plates for efficient microbial monitoring. It has a configurable flow capacity from 10 LPM to over 200 LPM and allows you to set customizable ...
  • Indigo80

    Product Indigo80

    Portable, industrial-grade indicator designed for diagnostic measurements and data logging. It supports the simultaneous connection of two Indigo series probes or transmitters, allowing measurements of parameters such as humidity, temperature, dew point, carbon dioxide (CO₂), vaporized hydroge...
  • ISO 17025:2018 Flow Meters Calibration

    Product ISO 17025:2018 Flow Meters Calibration

    Calibrations are performed on any flow rate up to 300 l/min with an uncertainty of 1.8%, through Altiorlab, QSGroup's ISO 17025:2018 ILAC MRA certified laboratory. Calibration can be performed at our laboratory, at the customer’s site or with our mobile laboratories (UOM ISO 17025:2018 certified).
  • ISO 17025:2018 Portable and Remote Particle Counters Calibration

    Product ISO 17025:2018 Portable and Remote Particle Counters Calibration

    Calibration are performed according to all the points required by ISO 21501 4:2018, the reference standard cited in ISO 14644 – 1:2015 (Annex A) for the calibration of optical particle counters of any brand. Calibration are performed through Altiorlab, QSGroup's ISO 17025:2018 accredited laborato...
  • ISO 17025:2018 T.O.C. Calibration

    Product ISO 17025:2018 T.O.C. Calibration

    This type of calibration activities are performed through Altiorlab, QSGroup's ISO 17025:2018 ILAC MRA certified laboratory. QSGroup is the first and only Company in the world to offer ISO 17025:2018 ILAC MRA certification on TOC.

    The determination of the T.O.C. (Total Organic Carbon) in ...
show all 47 other products