Softgel Drying Systems

Softgel Drying Systems
Product Description

Tumbler dryers are offered as a standalone unit or in combination with our encapsulation machines. They’re UL or CE certified, with FDA approved material contact parts, and they fulfill the GMP standards of the pharmaceutical industry. Variable speed, high frequency blower, automatic capsules transfer, built in gentle heating, and more production parameters are set using a Programmable Logic Controller with touch-screen. Light-weighted baskets allow for quick changeovers, easy clean up, and inspection. They are available in single and double deck configurations.

  • TD5 - Dimensions: 2613 W X 1387 D X 1353 H Electrical power: 7KVA without heaters
  • TD8 - Dimensions: 3526 W X 1387 D X 1377 H Electrical power: 12KVA without heaters
  • TD10 - Dimensions: 4134 W X 1387 D X 1353 H Electrical power: 12KVA without heaters
  • TD24 - Dimensions: 4334 W X 1348 D X 1678 H Electrical power: 14KVA 

Technophar Equipment and Service

  • RO
  • 2019
    On CPhI since
Specifications
  • Supplied from
    Canada; Romania

Technophar Equipment and Service

  • RO
  • 2019
    On CPhI since

More Products from Technophar Equipment and Service

  • SGL107 or  SGL207

    Product SGL107 or SGL207

    Lab Scale Softgel Machine
    • Motion Control System: the most important mechanical gearing replaced with electronic gearing in synchronized loops, using servo motors.
    • Die Roll Dimensions: 4" x 3"
    • Operation Speed: up to 3 RPM
    • Control of all production and process parameters using Programmable Logic Controllers (PLC) with touch screen.
    • Electrical panel and PLC incorporated within the machine.
    • Sealed construction to prevent leakage and subsequent contamination.
    • Aluminum frame construction prevents any possible rust and allows easy cleaning and maintenance.
    • Outside covers of the machine are stainless steel, designed according to GMP/FDA requirements.
  • SGM612 Next Gen

    Product SGM612 Next Gen

    Commercial Scale Softgel Machine 
    • Motion Control System: the mechanical gearing replaced with electronic gearing in synchronized loops, using servo motors.
    • Die Rolls dimensions: 6"x 12"
    • Operation Speed: up to 8 RPM. Nominal production speed of 6 RPM.
    • Control of all production and process parameters using Programmable Logic Controllers (PLC) with touch screen.
    • Electrical panel and PLC incorporated within machine.
    • Sealed construction to prevent leakage and subsequent contamination.
    • Aluminum frame construction prevents any possible rust and allows easy cleaning and maintenance.
    • The outside covers are made from stainless steel, designed according to GMP/FDA requirements.
  • ILDS24 - Softgel Inline Drying System

    Product ILDS24 - Softgel Inline Drying System

    The ILDS24 is an automated continuous capsule drying system consisting of 2 parallel rows of 12 drying units each, connected to a central line of air distribution units. The two lines have 3 drying zones fed with air at different temperature and humidity parameters to insure an efficient drying of the capsules. The capsules exiting the system at the end of the drying cycle are ready for final inspection and packaging. The use of pre drying tumbler dryers and Drying tunnels and the associated work is eliminated. Cycle time, basket speed, blowers speed, drying air parameters are fully programmable through integrated PLC and Touch screen HMI and adapted to the soft capsule machine settings. Suitable for drying oil filled capsules.
  • Softgel Drying Tunnels - LDT

    Product Softgel Drying Tunnels - LDT

    The insulated tunnels are constructed from GMP materials and ready to be installed at the client’s site, customized to suit the existing room. The tunnels are sized to accept stacks of drying trays while exposed to the drying airflow. Air Handling Units are to be provided to enable air transit through the tunnels. The amount of dry air required is determined by the operating parameters. LDT - Drying tunnels made of self-supporting walls using standard wall panels in a composite construction of two external skins of painted steel sheets or high pressure plastic laminate.
  • Softgel Auxiliary Equipment

    Product Softgel Auxiliary Equipment

    MELTERS:  Technophar can supply standard and fully automated melters. Choose plug and play melters for lab scale. We have commercial size standard and automated melters including load cells, automated evacuation, temperature control, mixing, and PLC with recipe screen. TANKS: A wide variety of GMP/FDA standard tanks are offered as per Technophar design, constructed from stainless steel with capacity of 50 L to 400 L. Our selection includes tanks with a single wall or double wall with temperature control to maintain the prescribed temperature and gelatin pressurized tanks. POLISHERS: The Capsules Polisher is a machine capable of operating in two modes: manual and automatic with a tumbler basket capacity of 120 kg. It’s fabricated from stainless steel and FDA approved material contact parts to fulfill the GMP standards of the pharmaceutical industry.
  • Empty Hard Capsule Machines

    Product Empty Hard Capsule Machines

    EMPTY HARD CAPSULE MACHINES   For over three decades, Technophar has been producing the highest quality hard gelatin capsule machines. Today with more than 300 machines have been installed globally at some of the largest hard gelatin capsule manufacturers. Many of these projects were turnkey solutions.   Technophar continues to supply third party empty hard gelatin capsule machines.
  • S2 Capsule Band Sealing

    Product S2 Capsule Band Sealing

    CAPSULE BAND SEALINGTechnophar and Qualicaps® are the world’s most innovative manufacturers of two-piece capsule band sealing equipment. Our commercially proven technology uses a double band seal for durability, protection, and visibility. S2 BENCH-TOP CAPSULE BAND SEALERThe S-2 banding machine is the perfect addition to enhance capsule development options in the laboratory. Simulating the sealing process of a commercial scale S-40 or S-100 capsule band-sealing machine, the S-2 Bench-Top Capsule Band-Sealer is capable of sealing between 100 and 1,000 capsules per hour.
  • Tooling & Spare Parts

    Product Tooling & Spare Parts

    DIE ROLLS - Die rolls are available for all Technophar machines, as well as any other soft gel machine manufacturers. All the tooling is made in house using high-precision CNC machines and CMM measuring instruments for quality control. Smooth services free of any scratches make gelatin sticking impossible and provide easier release of the formed capsule. High corrosion resistance and excellent lasting durability is provided due to the use of the highest strength of Aircraft quality Aluminum.  WEDGES - Teflon coated wedges in brass or aluminum are available in all configurations and lengths and offer superior heat control. DISTRIBUTOR PLATES/TIMING GEAR - Available on request.
  • Softgel Machine Brochure

    Product Softgel Machine Brochure

    Pilot and Production Scale Machines:SGL107 / SGL207 SGM407 SGM610i SGM612i SGM812i

Technophar Equipment and Service resources

Recommended products