CPhI Online is the largest global marketplace in the pharma ingredients industry
BIO SAFETY CABINET
Biological Safety Cabinets (BSCs) are among the most effective and the most commonly used primary containment devices in laboratories working with infectious agents.The three general types available (Class I, II, III) have performance characteristics and applications which are described in this policy.
Properly maintained Class I and II BSCs, when used in conjunction with good microbiological techniques, provide an effective containment system for safe manipulation of moderate and high-risk microorganisms (Biosafety Level 2 and 3 agents).
Map Filters (India) Pvt. Ltd.
2019On CPhI since
- Supplied fromIndia
Map Filters (India) Pvt. Ltd.
2019On CPhI since
More Products from Map Filters (India) Pvt. Ltd.
A PRE-FILTER is a device which removes unwanted large matters from the air. Air pre-filters include masks and respirators. Supplied air in the workplace or transport vehicles has air pre-filters to remove dust, hair, insects, pollen, fibers, etc.
Designed for life Science and Pharmaceutical applications that require a flush wall surface with radius corner for ease of cleaning, non-porous surfaces, and resistance to microbial and fungal growth as well as architectural finishes that withstand repeated cleaning and Sanitization with various chemical solution
The Mini pleat Hepa Filter is designed to meet the demanding airflow and efficiency requirements of the semiconductor, pharmaceutical, biotech, food processing, and other industries in which airborne contaminants must be carefully controlled.
With 2", 3", and 4" deep media packs, the mini-pleat design reduces resistance and provides the lowest possible pressure drop. Ribbons of media maintain pleat separation within the pack, while allowing a more compact filter depth than corrugated separators.
The media pack is bonded to the sides of the extrude aluminum frame with urethane adhesive, forming an airtight seal. Microglass media is water-resistant and fire-retardant.
1. MOC: SS-304, MS powder coated/ epoxy painted2. Flame proof models are available
3. Standard size available: 3'X2', 4'X2', 6'X2', 4'X 3', 4'X4',6'X3', 6.X4' as well as custom made sizes
ISO 14633-1 class 5 (class 100) safe working zone
1. Protective grills
2. Minipleat hepa filter of efficiency 99.99% for supply
3. Feather touch on-off switch
4. Drag shield to create air barrier at front side
5. Internal SS pencil coving
6. All maintenance can be done from front side
7. Dynamically balanced motor blower assembly
8. Low vibration and low noise level (below 65 db)
9. Suitable for filling, refilling, weighing and sampling of raw materials and compounds
Dynamic Pass Box equipment are made of high grades stainless steel (304) with international quality standard components including mechanically or electrically interlocked doors and UV light.
These dynamic pass box equipment are equipped with suction filter made of stainless steel with 95% down to 5µ efficiency (EU-4rating) and supply filter made of aluminum with 99.999% down to 0.001 µ (EU-14 Rating.)
An interlock guard system controls the inlet and the outlet of PASS BOX not be opened at the same time, in order to prevent the cross contamination.
Static Pass boxes help to minimize the amount of particulate contamination entering the clean room and also ensure to reduce the operator traffic.
The extensive range of equipment and material is passed into the clean room via the pass box, as these are fitted with a mechanical interlock system that prevents both doors from being opened at the same time.Our range is highly affordable way to maintain the cleanliness of room, easy to install and adaptable to different working conditions.
Mobile Trolley LAF is used to protect the material from contamination by preventing cross contamination, while passing through non sterile area in between two sterile zones.
The mobile trolley works on battery backup, while it is on mobile mode i.e. while movement of material from a sterile zone to sterile zone passing non sterile zone.
The unit is used in industrial manufacturing for protection of the product in areas like Pharmaceutical, Bio-tech industry, filling section, Assembling processes, Tissue culture and others. Further, the unit is ideal to protect product from particular contamination with the help of class 100 airs & UV tube.
We are engaged in offering our clients an extensive range of Room Garment Cubicles, which is manufactured using latest technological and innovations techniques.
These are widely used for storage of clean apparel for clean rooms as these are equipped with HEPA filter and U.V. germicidal tube. Therefore, these are safe and ensure that the garments completely free from bacterial contamination.
We offer these cubicles with additional features for odor neutralization and infrared lamps that meet the demands of various sectors.
Microprocessor control system
Factory pre-wired and tested
Emergency panic switch
Modular design helps tiny transporting and erection
Hepa filtered air is 99.99% efficient on 03micron and recalculated for Containment
Noise / vibration free operation
Shower duration 0-120 sec adjustable
An Air Handling Unit (AHU's) is a device used to Condition & Circulate Air as part of a heating, ventilating & air conditioning system.
Position your company at the heart of the global Pharma industry with a CPhI Online membership
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
Generate high-quality, engaged leads for your business, all year round
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
Your company’s profile boosted at all participating CPhI events
An easy-to-use platform with a detailed dashboard showing your leads and performance